Enable TxAdmin
This guide explains how to enable TxAdmin on your FiveM server hosted by CloudFive.
Enabling TxAdmin requires an additional port. If you don't create one, TxAdmin won't be able to start.
1. Access network settings
Log in to your CloudFive panel:
Select your FiveM server, then go to the Network tab.
2. Create a new allocation
Click the CREATE ALLOCATION button.
3. Get the new port
A new allocation will be created automatically.
Copy the new port number that was just assigned to you.
Keep this number, it will be used for TxAdmin.
4. Open the startup settings
Go to the Startup tab.
5. Configure TxAdmin
Scroll down to the following variables:
- TXADMIN PORT
- ENABLE TXADMIN
In TXADMIN PORT, paste the port number you copied earlier.
Then enable ENABLE TXADMIN by toggling the switch to ON.
When the option is enabled, the button turns orange.
Make sure to use only the newly created port. Using the server's main port will prevent TxAdmin from working correctly.
6. Restart the server
Once the configuration is complete, restart your server.
In the console, you should get a result similar to this:
7. Access the TxAdmin interface
After the server starts, locate the second link shown in the console (highlighted in red in the screenshot).
Open this link in your browser.
You'll then need to enter the validation code displayed in the console to finish setting up TxAdmin.
🎉 Congratulations!
Your TxAdmin interface is now enabled and ready to use.
Common issues
TxAdmin doesn't start
Check the following:
- An additional allocation has been created.
- The correct port is set in TXADMIN PORT.
- ENABLE TXADMIN is enabled.
- The server has been restarted after the changes.
If the problem persists, open a support ticket with CloudFive support and attach your console logs.